Best Chocolate Peppermint Bark Christmas Recipes

CHOCOLATE PEPPERMINT BARK

Steps:

• Line baking sheet with parchment paper or wax paper. Tip: to keep the paper from moving on the baking sheet, dot a bit of the melted chocolate in each corner of the baking sheet to secure the paper.
• Place the chocolate chips in a large microwave safe bowl. Microwave the chocolate chips on High in increments of about 20 seconds, stirring well in between microwave sessions. Keep stirring until all the chocolate chips are melted and smooth. Don't overheat the chocolate.
• Pour and then spread the melted chocolate evenly over the parchment paper. Chill the chocolate layer in the fridge for about 20-30 minutes, or until the chocolate is firm.
• Place the white chocolate and optional peppermint extract in a large microwave safe bowl. Repeat the same melting procedure for the white chocolate (again make sure to stir well in-between microwave sessions and being careful not to overheat the white chocolate). When white chocolate is melted, pour and gently spread it over the chocolate mixture and then immediately sprinkle the crushed candy canes on top. Gently press the peppermint candy into the white chocolate.
• Return the pan to the fridge and chill for another 30 minutes, or until the bark is completely solid.
• Gently loosen the peppermint bark from the parchment and allow the bark to come to room temperature. Break the barck into large pieces. Allowing the bark to come to room temperature before breaking ensures that the layers to bond together better so that when you break the bark, the two layers don't separate.enjoy!

CHOCOLATE PEPPERMINT BARK - CHRISTMAS

Steps:

• Line a 9x12 pan with parchment paper.
• Melt the dark chocolate (use the method you prefer, either double boiler, or microwave - cook 30 seconds in a heat-proof bowl, stir and repeat until you have a smooth consistency.
• Pour the melted dark chocolate on the parchment paper, spread the chocolate out until it is about 1/3" thick. You can do this by hitting the pan on the countertop repeatedly, or maybe you could use a spatula to spread the chocolate.
• Melt the white chocolate, using the steps above. After the chocolate is smooth, pour it on top of the dark chocolate - trying to make the layers the same thickness. (it's best to do this step while the white chocolate is still very soft -- I've had them separate when I broke them into pieces, I think the layers "stick" together better if the white chocolate has not hardened).
• Unwrap the starlite mints, or peppermints of your choice and put them into a heavy duty ziplock bag. Using a hammer or meat tenderizer - crush the mints then, while the white chocolate is still melted sprinkle on top.
• Let the chocolates harden in the refrigerator for 2 hours, then break the candy into pieces. This needs to be stored in the refrgerator if you live in a warm/humid climate.

MILK CHOCOLATE PEPPERMINT BARK

Steps:

• Line a 12x18 inch jelly roll pan with aluminum foil.
• Melt the milk chocolate in a microwave-safe glass or ceramic bowl in 30-second intervals, stirring after each melting, for 1 to 5 minutes (depending on your microwave). Do not overheat or chocolate will scorch. Stir in the peppermint extract. Spread the chocolate evenly in the prepared pan; chill until set, about 30 minutes.
• Meanwhile, melt the white chocolate in a microwave-safe glass or ceramic bowl in 30-second intervals, stirring after each melting, for 1 to 5 minutes. Stir in 1/4 cup of the crushed candy canes. Spread the white chocolate mixture evenly over the milk chocolate. Sprinkle the remaining candy cane pieces evenly over the white chocolate layer. Chill until set, about 1 hour. Break into small pieces to serve.

TRIPLE CHOCOLATE PEPPERMINT BARK

Steps:

• With a pencil and ruler, measure out and mark a 9 by 13-inch (23 by 33 cm) rectangle on a piece of parchment paper large enough to fit in a sheet pan. Flip the paper over (so the pencil marks are on the bottom), and then place the paper on a sheet pan.
• Place the bittersweet chocolate in a heatproof bowl and set it over a saucepan of barely simmering water (do not allow the bottom of the bowl to touch the water). Stir occasionally until the chocolate is melted and smooth. Remove the chocolate from the heat and pour it onto the rectangle on the parchment. Using an offset spatula, spread the chocolate to fill in the rectangle. Chill until set, about 15 minutes.
• While the chocolate is setting, in the same bowl you used to melt the bittersweet chocolate, combine the semisweet chocolate, cream, and peppermint extract. Warm it over the barely simmering water, stirring frequently, until the mixture is just melted and smooth. Remove the bowl from the heat and let the mixture cool until it is room temperature, about 15 minutes. Remove the sheet pan from the refrigerator and pour the semisweet chocolate mixture over the chilled chocolate rectangle. Using an offset spatula, spread the semisweet chocolate in an even layer, then chill until very cold and firm, about 1 hour.
• In a clean bowl, warm the white chocolate over barely simmering water until the chocolate is smooth. Working quickly, pour the white chocolate over the firm semisweet layer, using a clean offset spatula to spread it to cover. Sprinkle with the crushed candy canes. Chill in the refrigerator just until firm, about 20 minutes.
• Carefully transfer the parchment paper from the sheet pan to a large cutting board. Trim away any uneven edges of the bark so the sides are straight. Cut the bark into 2 by 9-inch (5 by 23 cm) wide strips, then cut the strips into squares or triangles.
• Let the bark stand at room temperature for 10 minutes before serving. Store in an airtight container, layering sheets of wax paper or parchment paper between the layers so the pieces don't stick to one another, in the refrigerator for up to 1 week.