Best Candy Making How To Temper Chocolate Recipes

CANDY MAKING : HOW TO TEMPER CHOCOLATE

Steps:

• 1. Tempered chocolate is the secret to professional chocolate products. Chocolate that has been tempered is smooth, with a shiny finish and a satisfying snap. If you're planning on making dipped chocolates or molded chocolates, the chocolate will need to be tempered so that it behaves properly and produces candies that are both tasty and beautiful. Learn how to temper chocolate with these easy steps.
• 2. Chop your chocolate. It is best to use at least 1 pound of chocolate, as it is easier to temper (and retain the temper) of larger amounts of chocolate. If this is more than you need, you can always save the extra for later use. Be sure that your chocolate is in block or bar form, not chocolate chips. The chips have additives that allow them to retain their shape at higher temperatures, and so they will not temper properly.
• 3. Place it in the top of a double boiler, set over simmering water. Melt 2/3 of your chocolate , Securely clip a chocolate or instant-read thermometer to the side of the boiler to monitor the chocolate's temperature.
• 4. Stir gently but steadily as the chocolate melts and heats up. Use a rubber spatula, not a wooden or metal spoon.
• 5. Bring the chocolate to 115 degrees (for dark chocolate) or 110 degrees (for milk or white chocolate). Do not allow the chocolate to exceed its recommended temperature. When it is at the right temperature, remove it from the heat, wipe the bottom of the bowl, and set it on a heat-proof surface.
• 6. Add the remaining chunks of chocolate and stir gently to incorporate. The warm chocolate will melt the chopped chocolate, and the newly added chocolate will bring down the temperature of the warm chocolate.
• 7. Cool the chocolate. Once the chocolate gets below 84 degrees, remove the remaining chunks of chocolate. They can be cooled, wrapped in plastic wrap, and saved for another use.
• 8. Reheat the chocolate briefly.Place the chocolate bowl over the warm water in the double boiler for 5-10 seconds, remove it and stir, and repeat, until the temperature reaches 88-89 degrees (87 for milk and white chocolate). Do not leave the chocolate over the hot water, or allow it to exceed 91 degrees.
• 9. Your chocolate should now be tempered! To make sure it has been done properly, do a spot test: spread a spoonful thinly over an area of waxed paper and allow it to cool. If the chocolate is shiny and smooth, it is properly tempered. If it is dull or streaky, it has not been tempered correctly. Test the temper by dipping a knife tip into the chocolate and letting it sit for two to three minutes. Is it still sticky? It's not in temper. Properly tempered chocolate should be firm to the touch after a few minutes.
• 10. Tip : To use tempered chocolate, you must keep it warm but not hot, ideally in the 85-88 degree range (86 degrees for milk and white chocolate)v. You can either keep it over a pan of warm (but not simmering) water, stirring occasionally, or try placing it on an electric heating pad set to "low." Whichever method you choose, it's important to stir often so that the chocolate remains a uniform temperature throughout.
• 11. Tempering Chocolate the Easy Way :
• 12. If you are using high-quality chocolate that is already tempered, you might be able to use a shortcut and avoid going through the whole tempering process. By carefully melting the chocolate at low temperatures, it is possible to retain the temper. First, ensure that your chocolate is indeed tempered: carefully examine the surface, making sure that it is glossy, smooth, and without streaks or blemishes. Next, break the chocolate, making sure that it has a crisp "snap" when broken, and that the texture of the inside of the chocolate is uniform. If all of these conditions are met, you can attempt to melt the chocolate while keeping the temper.
• 13. To use this method, chop 1 pound of tempered, semisweet chocolate in coarse chunks. Microwave it at 50% power for 3 minutes, stopping every 30-45 seconds to stir the chocolate with a rubber spatula. Remove the chocolate when 2/3 of it has melted, and stir the chocolate until the remaining chunks are fully melted. If the chunks do not melt, warm the chocolate again very briefly.
• 14. Check the temperature with a chocolate or instant-read thermometer. If it is less than 90 degrees (88 degrees for milk or white chocolate), it is still in temper and ready to be used. Remember to do a spot test to make sure: spread a spoonful thinly over an area of waxed paper and allow it to cool. If it is tempered, the chocolate will harden within 5 minutes and look shiny and smooth. If it is dull or streaky, it has lost its temper, and you shouldtemper the chocolate again.

HOW TO TEMPER CHOCOLATE

Steps:

• 1. Finely chop 1 1/2 to 2 pounds chocolate. Smaller amounts make it difficult to control the temperature changes.
• 2. Place two-thirds of the chocolate in a double boiler or metal bowl set over a saucepan of simmering water. Make sure the bottom of the bowl does not touch the water. Place a candy thermometer or digital thermometer in the chocolate and stir frequently with a rubber spatula.
• 3. Do not let the temperature of the chocolate exceed 120°F for dark chocolate or 105°F for milk or white chocolate. When the chocolate has fully melted, remove the bowl from heat. Wipe the bottom of the bowl to get rid of any condensation.
• 4. Stir in the remaining third of the chocolate a little at a time. Let it melt before adding more.
• 5. Let the chocolate cool to about 82°F. It it is warmer, keep stirring and let it cool some more. If it is cooler, begin reheating in the next step.
• 6. Once the chocolate is 82°F, place it back over simmering water. For dark chocolate, reheat to 88°F to 91°F. For milk and white chocolate, reheat to 85°F to 87°F. Remove the bowl from heat once you have reached the right temperature.
• 7. Spread a small spoonful of chocolate on a piece of wax paper. If it looks dull or streaky, re-temper the chocolate, starting with step 2. If it dries quickly with a glossy finish and no streaks, the chocolate is in temper.
• Keeping chocolate in temper
• Once melted chocolate has been tempered, it must be used before it cools and sets. If it cools to about 84°F to 86°F and is still fairly liquid, it can be reheated to a liquid consistency. If it has completely cooled and solidified, it should be re-tempered. Heat it for 5 to 10 seconds at a time, stirring and checking the temperature before reheating. For dark chocolate, reheat to 88°F to 91°F. For milk and white chocolate, reheat to 87°F to 88°F. If you keep your chocolate within these temperature ranges, it will stay in temper and be liquid enough to use.
• Easy alternatives to tempering chocolate
• Several products exist for those who do not want to temper chocolate. They are called confectionery coatings, coating chocolate, summer coating, or chocolate bark coatings. They are usually made of vegetable fats that melt smoothly and set up quickly to a finish that is very similar to tempered chocolate. They may not contain actual chocolate. Nothing can perfectly duplicate the taste and mouth-feel of tempered chocolate, but quality coatings can be good substitutes. They can be cooled and reheated quickly, and as often as necessary.

HOW TO TEMPER CHOCOLATE

Steps:

• Tempering Chocolate: Tempering is important because it determines the final gloss, hardness, and contraction of the chocolate. When you melt chocolate, the molecules of fat separate. In order to put them back together, you temper it. There are a variety of ways to do it.
• One of the easiest ways to temper chocolate is to place it in the microwave for 30 seconds at a time on high power until the chocolate is melted. Be very careful not to overheat it. The chocolate should be only slightly warmer than your bottom lip, and it will retain its shape even when mostly melted. Any remaining lumps will melt in the chocolate's residual heat. You can also use an immersion blender to break up the lumps and start the recrystallization process. Usually, the chocolate begins to set, or crystallize, along the side of the bowl. As it sets, mix those crystals into the melted chocolate to temper it. I like to use a glass bowl because it retains the heat and keeps the chocolate tempered longer.
• Another way to temper chocolate is called seeding. In this method, tempering is achieved by adding small pieces of unmelted chocolate to melted chocolate. The amount of unmelted chocolate to be added depends on the temperature of the melted chocolate but is usually 1/4 of the total amount. I usually use an immersion blender to mix them together.

TEMPERED CHOCOLATE FOR TRUFFLES

Steps:

• Place 1/2 pound chocolate in a metal bowl. Bring a saucepan with 2 inches of water to a simmer, and then turn off heat. Set bowl with chocolate over saucepan, and let melt, stirring gently with a rubber spatula until chocolate registers 118 degrees on a candy thermometer. (Watch the chocolate carefully, as heating and cooling times can vary.) Remove bowl from saucepan.
• Add 1/4 pound unmelted chocolate to bowl and stir until chocolate cools to 84 degrees. (Remove any unmelted pieces with spatula.) Return bowl to saucepan, and let stand, and stir until chocolate registers 88 to 90 degrees. Use immediately. Repeat with remaining chocolate.